Zappi 22kW 3 Phase electric car charger for home

The latest intelligent ‘solar aware’ charger Australia has been waiting for. Not only will Zappi charge your car way faster than the device supplied with your car, it will also guarantee that all power used to charge is taken from your solar or wind generation. This 22kw electric car charger (available in black or white) is especially smart as it will enumerate all energy consumed and exported across all three phases!

Essentially, this device will guarantee that you will self consume all of your self generated energy rather than sell back to the grid for a pittance.

No PV, no problem – Zappi can still operate like an ordinary EV charging station. You can always add your solar/wind system later.

Find out how the Zappi works by watching this video from our Youtube Channel https://www.youtube.com/watch?v=dslQJ8RBvSg

You may need additional CTs or Harvis to monitor your Solar and/or Battery wall.  Please refer to this page for CT & Harvi requirements. If you need assistance on additonal CTs or Harvis for your installation, please contact us at sales@evolutionaustralia.com.au

Download Zappi V2 Manual

features and benefits of Zappi 22kW 3 Phase electric car charger for home

  • Comes in Black or White (add note at checkout for preference - subject to availability NOTE V2.0 Tethered only now available in black)
  • V2 requires separate hub; V2.1 has inbuilt ethernet/wifi so no extra hub needed
  • Programmable timer function
  • Dynamic load balancing for maximum installation flexibility
  • Charge and event logging
  • Pin-code lock function
  • Tap operated display backlight
  • Integral RCD for earth leakage protection
  • Integral cable holster
  • Remote control and monitoring add-on option
  • Supplied with 3 CT clamps in box
  • 3 charging modes (Fast, Eco and Eco+)
  • Optimises microgeneration self-consumption
  • Economy Tariff sensing to maximise savings
  • 18th edition ready 7kW OLEV (Home Scheme) Approved – Hub device required
  • 3 year warranty
  • IP65 rated enclosure suitable for outdoors
  • Elegant and beautiful design
  • High quality (Made in UK) Type 2 connector with 6.5m cable only.
  • Compatible with all Type 2 makes and model of EVs on the market (yes even Tesla) the EVSE / charger is suited to both domestic and commercial locations.

NOTE: Type 1 EVs will require a Type 2 to Type 1 adaptor cable.

SPECIFICATIONS

Enclosure Dimensions:  439x282x122mm
Protection Degree:  IP65 weatherproof
Max current: 32A
Enclosure material:  ASA
Operating temperature: -25C to +40C
Rated power:  22kW (3-ph)
Supply:  50Hz
Standby power consumption:  3W
Wireless interface:  868 MHz (proprietary protocol) for wireless sensor and remote monitoring options
Grid current sensor:  100A max. primary current, 16mm max. cable diameter
Cable entry: rear, bottom or side
Economy tariff sense: Input 230V AC sensing (4.0kV isolated)
Earth leakage protection integral:  30mA Type A RCD (EN 61008) + 6mA DC protection (EN 62955)